LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Venture LT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Diagnostic Information And Procedures >> Change Engine Oil Indicator Inoperative

Change Engine Oil Indicator Inoperative

Change Engine Oil Indicator Inoperative

Step Action Yes No
Schematic Reference:  Instrument Cluster Schematics  
1 Did you perform the Diagnostic System Check - Vehicle? Go to Step 2  Go to Diagnostic System Check - Vehicle in Vehicle DTC Information
2
  1. Install a scan tool.
  2. Turn ON the ignition, with the engine OFF.
  3. With a scan tool, observe the Engine Oil Life percent in PCM IPC data list.
Does the scan tool display zero percent while the Change Engine Oil message is inoperative?
Go to Step 3  System OK
3 Replace the instrument panel cluster (IPC). Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming.
Did you complete the replacement?
Go to Step 4  -
4 Operate the system in order to verify the repair.
Did you correct the condition?
System OK Go to Step 2