Center Pillar Lower Garnish Molding Replacement

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Center Pillar Lower Garnish Molding

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Disable the roof rail SIR system. Refer to SIR Disabling and Enabling . Remove the center pillar upper trim panel. Refer to Center Pillar Upper Garnish Molding Replacement .
1	Trim Panel Assembly, Center Pillar Lower Tip: Pull outward to disengage the retainer clips.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .
Remove the center pillar upper trim panel. Refer to Center Pillar Upper Garnish Molding Replacement .

Trim Panel Assembly, Center Pillar Lower
Tip: Pull outward to disengage the retainer clips.