LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cobalt SS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Upper

Trim Panel Replacement - Instrument Panel (I/P) Upper

Fig 1: Trim Panel Replacement - Instrument Panel (I/P) Upper
GM1539459Courtesy of GENERAL MOTORS CORP.
Trim Panel Replacement - Instrument Panel (I/P) Upper

Callout Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices.
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Disable the SIR system.
  2. Remove the instrument panel (I/P) trim plates.
  3. Remove the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .

    Tip: 

    Squeeze the upper and lower tabs of the hazard warning switch together. Remove the hazard warning switch from the I/P top panel.

  4. Remove the passenger inflatable restraint module. Refer to Inflatable Restraint Instrument Panel Module Replacement in SIR.
  5. Remove the I/P upper trim pad air grille assembly. Refer to Defroster Grille Replacement .
1 Screw, Instrument Panel Trim Pad (Qty: 12)

Tighten:  2.2 N.m (19 lb in)

2 Pad Assembly, Instrument Panel Trim
Tip:  Lift up to release the I/P top panel from the I/P retainer.