Bezel Replacement - Instrument Panel (I/P) Cluster

Fig 1: Bezel Replacement - Instrument Panel (I/P) Cluster

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the instrument panel (I/P) trim plates. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center . Refer to Instrument Panel (I/P) Trim Panel Replacement - Left . Tilt the steering wheel down.
1	Screw, Instrument Panel Cluster Bezel (Qty: 4) Tighten: 2.2 N.m (19 lb in)
2	Bezel Assembly, Panel Cluster Bezel

Callout

Component Name

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Screw, Instrument Panel Cluster Bezel (Qty: 4)

Tighten: 2.2 N.m (19 lb in)

Bezel Assembly, Panel Cluster Bezel