Chime Inoperative

Step	Action	Yes	No
Schematic Reference: Audible Warnings Schematics
1	Did you perform the Audible Warnings Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Audible Warnings
2	Install a scan tool. Turn ON the ignition, with the engine OFF. With a scan tool, perform the Chime Test in the Radio. Does the chime sound?	Go to Step 3	Go to Step 4
3	Open the driver's door. Does the door ajar indicator illuminate when the driver's door is opened?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Door Ajar Indicator Malfunction in Doors
4	Turn ON the radio. Adjust the radio balance and fade to the left front speaker. Does the speaker operate properly?	Go to Step 5	Go to Speakers Inoperative - One or More in Entertainment
5	IMPORTANT: Perform the set up procedure for the replacement radio or multifunction alarm module (RPO). Replace the radio. Refer to Radio Replacement in Entertainment or Multifunction Alarm Module Replacement .Did you complete the replacement?	Go to Step 6	-
6	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2