LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 910 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Pressure Relief Valve Removal (HT6/HD6/HU6) >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

J 34992  Compressor Holding Fixture

  1. Install the compressor onto the J 34992  .
  2. Remove the pressure relief valve (5) from the rear head of the compressor.
    Fig 1: Removing Pressure Relief Valve From Rear Head Of Compressor
    G01466846Courtesy of GENERAL MOTORS CORP.