LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 910 (Heating, Ventilation And Air Conditioning) >> Diagnostic Information and Procedures >> Diagnostic Starting Point - Heating, Ventilation and Air Conditioning

Diagnostic Starting Point - Heating, Ventilation and Air Conditioning

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

The Heating, Ventilation and Air Conditioning (HVAC) system is divided into two separate sections. The first, Heating, Ventilation and Air Conditioning, has all procedures that pertain to a HVAC component or function that is not specifically associated with the manual control system. The second, HVAC Systems - Manual, has all procedures specific to the manual control system.

Begin the system diagnosis with the:

The Diagnostic System Check will provide the identification of the control module(s) which command the system.

The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.

Review the Description and Operation information to help you determine the correct symptom diagnostic procedure when a malfunction exists. Reviewing the Description and Operation information will also help you determine if the condition described by the customer is normal operation. The HVAC Description and Operation information is divided into:

scientia non olet · About LEMON Manuals