LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (Seat Belt System) >> Rear Buckle Removal/Installation

Rear Buckle Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. (See REAR SEAT REMOVAL/INSTALLATION .)
  2. Remove in the order indicated.
    Fig 1: Rear Buckle Removal Sequence With Torque Specifications
    G00975969Courtesy of MAZDA MOTORS CORP.
    Fig 2: Rear Buckle Removal Sequence Legend
    G00975970Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.