LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 725 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Folding Outside Mirror Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Power Folding Outside Mirror Switch
    GM772995Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (IP) bezel. Refer to BEZEL REPLACEMENT - IP CLUSTER .
  2. Release the plastic retaining clips using a flat-bladed tool in order to remove the power folding mirror switch.
  3. Disconnect the electrical connectors.
  4. Remove the power folding mirror switch from the IP accessory housing.
scientia non olet · About LEMON Manuals