Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Place the subwoofer assembly in the vehicle.
- Route all wire harness in the IP extension.
- Connect the wire connector in front of the subwoofer speaker grill.
- Connect the wire connector (1).
- Install the IP extension to the IP. Refer to IP EXTENSION REPLACEMENT (LUXURY) or IP EXTENSION REPLACEMENT (NON-LUXURY) .
- Ensure the proper operation of the subwoofer.