LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Endgate (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Endgate Lock Cylinder (Avalanche)
    GM827166Courtesy of GENERAL MOTORS CORP.
  1. Install the lock cylinder into the cylinder sleeve (3). Ensure that the cylinder is fully seated into the retaining tabs (2).
  2. Install handle bezel to the endgate. Line up the lock cylinder arm (4) with the opening in the handle. Refer to Endgate Adjustment .
scientia non olet · About LEMON Manuals