LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 648 (Instrument Panel, Gauges & Console) >> Repair Instructions >> 12-Volt Power Supply Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power supply fuse.
  2. Lift up the front cover of the socket.
  3. Insert the J 42059 into the socket sleeve. Tilt the tool so that the tool fits into the slots on the sides of the socket sleeve.
    4. Fig 1: Inserting Tool Into Lighter Socket
    G01697276Courtesy of GENERAL MOTORS CORP.
  4. Hold the plastic ring in place. Pull the socket gently out of the assembly in order to remove the outlet.
    5. Fig 2: Removing Lighter Socket Outlet
    G01697277Courtesy of GENERAL MOTORS CORP.
  5. Remove the electrical connector from the socket.
    6. Fig 3: Removing Electrical Connector
    G01697278Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals