LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Drum Brake Adjusting Hardware >> Removal

Drum Brake Adjusting Hardware: Removal

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Remove the tire and wheel assembly. Remove the brake drum. See DRUM BRAKE ADJUSTMENT  .
  2. Remove the brake shoe return springs. Remove the brake shoe guide. See Figure .
  3. Remove the hold down springs. See Figure . Remove the hold down pins.
  4. Remove the actuator lever and the actuator lever pivot. See Figure . Remove the actuator lever and the lever pivot.
  5. Remove the lever return spring. See Figure . Inspect all remaining parts for discoloration due to heat or stress. Replace parts as needed.
scientia non olet · About LEMON Manuals