LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Disc Brakes & Drum Brakes) >> Overhaul >> Drum Brake Components >> Backing Plate Installation

Backing Plate Installation

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the backing plate. Install the rear wheel hub. See appropriate REAR SUSPENSION article in SUSPENSION. Install the parking brake cable to the backing plate.
  2. Install the wheel cylinder. See WHEEL CYLINDERS  under REMOVAL & INSTALLATION. Install the universal spring.
  3. Install the brake shoes. See REAR BRAKE SHOES  under REMOVAL & INSTALLATION. Adjust the rear drum brakes. See DRUM BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS. Install the brake drum. See REAR BRAKE DRUM  under REMOVAL & INSTALLATION.
  4. Bleed the brake hydraulic system. See BLEEDING BRAKE SYSTEM  . Adjust the parking brake. See PARKING BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS.
  5. Install the tire and wheel assembly. Lower the vehicle.
scientia non olet · About LEMON Manuals