LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Wheel Cylinder >> Installation

Wheel Cylinder: Installation

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wheel cylinder. Install the wheel cylinder bolts. Tighten the bolts to specifications. See TORQUE SPECIFICATIONS  .
  2. Remove the cap from the brake pipe and install the brake pipe to the wheel cylinder. Tighten the nut to specifications. See TORQUE SPECIFICATIONS  .
  3. Install brake shoes. Adjust the brake shoes. See ADJUSTMENT  under DRUM BRAKES in ADJUSTMENTS & INSPECTIONS. Install the brake drum. See BRAKE DRUM  . Bleed the hydraulic brake system. See BLEEDING BRAKE SYSTEM  . Install the tire and wheel. Lower the vehicle.
scientia non olet · About LEMON Manuals