Drum Brake Hardware: Installation
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Apply Lubriplate(R) Lubricant, GM P/N 1050109, Canadian P/N 5264008, or the equivalent, to the metal contact points on the backing plate and the adjuster strut. Assemble the adjuster strut.
- Install the adjusting hardware with the shoes. See BRAKE SHOES .
- Adjust the drum brakes. See ADJUSTMENT under DRUM BRAKES in ADJUSTMENTS & INSPECTIONS. Install the brake drum. Install the rear wheel and tire. Lower the vehicle.