LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 508 (Disc Brakes) >> Removal & Installation >> Park Brake Cable >> Removal - Rear

Removal - Rear

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the park brake automatic adjuster. See DISABLING PARKING BRAKE AUTOMATIC ADJUSTER  under ADJUSTMENTS & INSPECTIONS.
  2. Raise and support the vehicle.
  3. Remove the rear stabilizer shaft bracket bolts and nuts. Remove the rear stabilizer shaft brackets and insulators. Position the stabilizer shaft downwards. Remove the left side exhaust muffler bolts. Remove the exhaust muffler gasket. Slide the muffler blade out from the hanger. Remove right muffler.
  4. Disconnect the rear park brake cable at the retainer and equalizer.
  5. Remove the rear park brake cable from the rear suspension mounting bracket.
  6. Remove the rear park brake cable retainer nut.
  7. Remove the rear park brake cable from the vehicle.
scientia non olet · About LEMON Manuals