LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Engine Mechanical - 6.6L V8 Diesel) >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install pump gears into pump body with marked gear teeth indexed. Reassemble remaining components in reverse order of disassembly.
  2. Install pump and extension shaft on engine, ensuring slot on top of extension shaft engages with drive tang on end of pump drive or vacuum pump. Tighten mounting bolt to specification. See TORQUE SPECIFICATIONS . Install oil pan.
Fig 1: Exploded View Of Cylinder Head Components
G00081890Courtesy of GENERAL MOTORS CORP.
Fig 2: Exploded View Of Top Engine Components
G00081889Courtesy of GENERAL MOTORS CORP.
Fig 3: Exploded View Of Engine Cover Components
G00081888Courtesy of GENERAL MOTORS CORP.
Fig 4: Exploded View Of Intake & Exhaust Components (California Emissions)
G00081887Courtesy of GENERAL MOTORS CORP.
Fig 5: Exploded View Of Intake & Exhaust Components
G00081886Courtesy of GENERAL MOTORS CORP.
Fig 6: Exploded View Of External Engine Components
G00081885Courtesy of GENERAL MOTORS CORP.
Fig 7: Exploded View Of Front Engine Components (California Emissions)
G00081884Courtesy of GENERAL MOTORS CORP.
Fig 8: Exploded View Of Front Engine Components (Federal Emissions)
G00081883Courtesy of GENERAL MOTORS CORP.
Fig 9: Exploded View Of Rocker Arm Upper Components
G00081891Courtesy of GENERAL MOTORS CORP.
Fig 10: Exploded View Of Oil Pump Components
G00081893Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals