Disassembly & Reassembly
WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
If vent is damaged, use pliers and pry bar to remove vent. See Fig 1. Use hammer and punch to install vent. If oil pressure test hole plug was removed, install plug and tighten to specification. See TORQUE SPECIFICATIONS .