LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Servicing - A/T (VT25-E)) >> Removal & Installation >> Transaxle Oil Cooler Line Assembly >> Installation

Transaxle Oil Cooler Line Assembly: Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install transaxle oil cooler line assembly to transaxle. See Figure .
  2. Install transaxle oil cooler line nut and tighten to specification. See TORQUE SPECIFICATIONS  .
  3. Lower vehicle.
  4. Install transaxle oil cooler lines to radiator and tighten to specification. See TORQUE SPECIFICATIONS  .
  5. Add fluid to transaxle. See CHECKING FLUID LEVELS  under LUBRICATION.
  6. Start engine and check for leaks.
scientia non olet · About LEMON Manuals