LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 2002 (Hybrid Cooling System - 3.6L (Hp5)) >> Repair Instructions >> Drive Motor Battery Coolant Pump Inlet Hose Replacement

Drive Motor Battery Coolant Pump Inlet Hose Replacement

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drive Motor Battery Coolant Pump Inlet Hose Replacement
GM2177353Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the drive motor battery coolant cover. Refer to Drive Motor Battery Coolant Cooler Cover Replacement .
  2. Drain the drive motor battery coolant cooling system. Refer to Drive Motor Battery Cooling System Draining and Filling .
  3. Reposition drive motor battery coolant cooler as necessary to gain access for hose and clamps. Refer to Drive Motor Battery Coolant Cooler Replacement .
1 Drive Motor Battery Coolant Cooler Pump Inlet Hose Clamp (Qty: 2)
2 Drive Motor Battery Coolant Cooler Pump Inlet Hose
scientia non olet · About LEMON Manuals