Ignition Key Cannot Turn or Sticks in Any Position
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the Steering Wheel and Column System Description and perform the necessary inspections? | Go to Step 2 | Go to Steering Wheel and Column Description and Operation |
| 2 | Verify that the ignition lock system has a high lock effort. Does the ignition lock system operate normally? |
System OK | Go to Step 3 |
| 3 | Inspect for an incorrect, worn, or damaged ignition key. Is the ignition key incorrect, worn, or damaged? |
Go to Step 7 | Go to Step 4 |
| 4 | Inspect for a faulty ignition lock cylinder. Is the ignition lock cylinder damaged? |
Go to Step 8 | Go to Step 5 |
| 5 | Inspect the ignition/start switch housing for damage. Is the ignition/start switch housing damaged? |
Go to Step 9 | Go to Step 6 |
| 6 | Inspect the ignition/start switch for damage. Is the ignition/start switch damaged? |
Go to Step 10 | Go to Step 7 |
| 7 | Replace the ignition key. Refer to Key and Lock Cylinder Coding
. Did you complete the repair? |
Go to Step 11 | - |
| 8 | Replace the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement (With Electronic Power Steering)
or Ignition Lock Cylinder Replacement (With Hydraulic Power Steering)
. Did you complete the repair? |
Go to Step 11 | - |
| 9 | Tighten or replace the ignition/start switch housing. Refer to Ignition and Start Switch Housing Replacement (With Electronic Power Steering)
or Ignition and Start Switch Housing Replacement (With Hydraulic Power Steering)
. Did you complete the repair? |
Go to Step 11 | - |
| 10 | Replace the ignition/start switch. Refer to Ignition and Start Switch Replacement
. Did you complete the repair? |
Go to Step 11 | - |
| 11 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |