LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1929 (Engine Mechanical - 3.6L (2 Of 6)) >> Repair Instructions - On Vehicle (1 Of 2) >> Drive Belt Tensioner Replacement (LY7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Drive Belt Tensioner
    GM1826812Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Position the tensioner and install the tensioner bolts. Tighten the bolts to 25 N.m (18 lb ft).
  2. Tighten the idler pulley. Tighten the idler pulley bolt to 58 N.m (43 lb ft).
  3. Install the engine harness channel bolt.
  4. Install the drive belt. Refer to Drive Belt Replacement (LY7)  or Drive Belt Replacement (LCS) .
scientia non olet · About LEMON Manuals