LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1928 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Belt
    GM1607918Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  3. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement 
  4. Rotate the drive belt tensioner clockwise in order to release the spring tension.
  5. Remove the drive belt from around the tensioner pulley.
  6. Remove the drive belt from around all the other pulleys.
  7. Remove the drive belt from the vehicle.
scientia non olet · About LEMON Manuals