LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1910 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Side Door Upper Hinge and Lower Hinge Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Hinge Rear Door
    GM928797Courtesy of GENERAL MOTORS CORP.
  1. Position the hinge to the vehicle with the marks made prior to removal.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the hinge to door bolts.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  4. Install the hinge to body bolts.

    Tighten:  Tighten the bolts to 36 N.m (27 lb ft).

  5. Inspect the door for proper alignment. Refer to Rear Side Door Adjustment .