LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1909 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Blower Case Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the HVAC module assembly. Refer to Air Conditioning and Heater Module Assembly Replacement .
  2. Remove the evaporator case assembly. Refer to Air Conditioning (A/C) Evaporator Case Assembly Replacement .
  3. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement .
    4. Fig 1: Blower Motor Screws & Blower Case Assembly
    GM933076Courtesy of GENERAL MOTORS CORP.
  4. Remove the blower motor screws from the blower case assembly.
  5. Remove the blower motor from the blower case assembly.
    6. Fig 2: Blower Motor Resistor, Screws & Blower Case Assembly
    GM933084Courtesy of GENERAL MOTORS CORP.
  6. Remove the blower motor control module screws from the blower case assembly.
  7. Remove the blower motor control module from the blower case assembly.
    8. Fig 3: View Of Blower Case Assembly Halves
    GM1646794Courtesy of GENERAL MOTORS CORP.
  8. Remove the screws retaining the two halves of the blower case assembly.
  9. Separate the two halves of the blower case assembly.
  10. Remove the evaporator core from the blower case assembly.
scientia non olet · About LEMON Manuals