LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1909 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Ambient Air Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Ambient Air Temperature Sensor
    GM1288834Courtesy of GENERAL MOTORS CORP.
  1. Remove the front fascia. Refer to Front Bumper Fascia Replacement (Base) or Front Bumper Fascia Replacement (Red Line) .
  2. Remove the push-in retainer that secures the ambient air temperature sensor to the impact bar.
  3. Disconnect the electrical connector from the ambient air temperature sensor.
  4. Remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals