LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1909 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Inlet Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Air Inlet Assembly Screws
    GM1646783Courtesy of GENERAL MOTORS CORP.
  1. Install the air inlet assembly.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the air inlet assembly screws.

    Tighten:  Tighten the screws to 1.5 N.m (13 lb in).

    3. Fig 2: View Of Recirculation Actuator
    GM1646802Courtesy of GENERAL MOTORS CORP.
  3. Install the recirculation actuator.
  4. Install the recirculation actuator screws.

    Tighten:  Tighten the screws to 1.5 N.m (13 lb in).

  5. Install the electrical connector to the recirculation actuator.
  6. Install the HVAC module. Refer to Air Conditioning and Heater Module Assembly Replacement .
scientia non olet · About LEMON Manuals