Rear Seat Cushion Cover and Pad Replacement (with 60 Percent Seat)

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Cushion Cover And Pad

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear seat. Refer to Rear Seat Replacement . Remove the rear seat recliner covers. Refer to Rear Seat Recliner Outer Finish Cover Replacement - Inboard (with 40 Percent Seat) or Rear Seat Recliner Outer Finish Cover Replacement - Inboard (with 60 Percent Seat) and Rear Seat Recliner Outer Finish Cover Replacement - Outboard (with 60 Percent Seat) or Rear Seat Recliner Outer Finish Cover Replacement - Outboard (with 40 Percent Seat) . Remove the rear seat belt buckle. Refer to Rear Seat Belt Buckle Replacement (w/40 percent Seat) or Rear Seat Belt Buckle Replacement (w/60 percent Seat) or Rear Seat Center Belt Buckle Replacement .
1	Rear Seat Pivot Pin Clip (Qty: 2)
2	Rear Seat Pivot Pin (Qty: 2)
3	Rear Seat Cushion Cover Procedure Lift the rear seat cushion frame up away from the seat riser far enough to slide the seat cushion cover away from the frame. Disconnect the rear seat cushion cover j-channels and straps from the rear seat cushion frame. Remove the rear seat cushion cover from the rear seat cushion pad.
4	Rear Seat Cushion Pad