Rear Seat Back Cushion Panel Replacement (with 60 Percent Seat)

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Back Cushion Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear seat. Refer to Rear Seat Replacement . Remove the rear seat recliner covers. Refer to Rear Seat Recliner Outer Finish Cover Replacement - Inboard (with 40 Percent Seat) or Rear Seat Recliner Outer Finish Cover Replacement - Inboard (with 60 Percent Seat) and Rear Seat Recliner Outer Finish Cover Replacement - Outboard (with 60 Percent Seat) or Rear Seat Recliner Outer Finish Cover Replacement - Outboard (with 40 Percent Seat) . Remove the rear seat head restraint. Refer to Rear Seat Head Restraint Replacement . Remove the seat belt opening cover, if equipped. Refer to Rear Seat Shoulder Belt Opening Bezel Replacement (with 60 Percent Seat) . Remove the rear child seat bracket trim cover. Refer to Child Seat Bracket Trim Cover Replacement . Remove the rear seat latch release strap bezel. Refer to Rear Seat Latch Release Strap Bezel Replacement .
1	Rear Seat Back Cushion Panel Procedure Disconnect the j-channel retainer on the bottom and reposition the cover and pad to access the back panel. Slide each of the clips on the back panel to the enlarged portion of each slot. Pull rearward on the back panel to remove. Position the clips to the back panel and clip onto the back frame wires for installation.

Callout

Component Name

Preliminary Procedures

Remove the rear seat. Refer to Rear Seat Replacement .
Remove the rear seat recliner covers. Refer to Rear Seat Recliner Outer Finish Cover Replacement - Inboard (with 40 Percent Seat) or Rear Seat Recliner Outer Finish Cover Replacement - Inboard (with 60 Percent Seat) and Rear Seat Recliner Outer Finish Cover Replacement - Outboard (with 60 Percent Seat) or Rear Seat Recliner Outer Finish Cover Replacement - Outboard (with 40 Percent Seat) .
Remove the rear seat head restraint. Refer to Rear Seat Head Restraint Replacement .
Remove the seat belt opening cover, if equipped. Refer to Rear Seat Shoulder Belt Opening Bezel Replacement (with 60 Percent Seat) .
Remove the rear child seat bracket trim cover. Refer to Child Seat Bracket Trim Cover Replacement .
Remove the rear seat latch release strap bezel. Refer to Rear Seat Latch Release Strap Bezel Replacement .

Rear Seat Back Cushion Panel

Procedure

Disconnect the j-channel retainer on the bottom and reposition the cover and pad to access the back panel.
Slide each of the clips on the back panel to the enlarged portion of each slot.
Pull rearward on the back panel to remove.
Position the clips to the back panel and clip onto the back frame wires for installation.