LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1837 (Parking Brake System) >> Repair Instructions >> Parking Brake Front Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Park Brake Cable & Adjusting Nut
    GM891458Courtesy of GENERAL MOTORS CORP.
  1. Install the front park brake cable to the park brake lever.
  2. Install the rear cable ends to the cable equalizer.
  3. Fig 2: Locating Parking Brake Cable Adjusting Nut
    GM891460Courtesy of GENERAL MOTORS CORP.
  4. Using ONLY hand tools, install the washer and NEW adjusting nut (1) to the front park brake cable.
  5. Adjust the park brake cable tension. Refer to Park Brake Adjustment .
  6. Install the front floor console. Refer to Front Floor Console Replacement .
  7. Enable the SIR system. Refer to SIR Disabling and Enabling .