LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1831 (Instrument Panel System Displays And Gauges) >> Repair Instructions >> Ambient Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Ambient Air Temperature Sensor
    GM1288834Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the ambient air temperature sensor.
  2. Install the ambient air temperature sensor to the impact bar and with the push-in retainer.
  3. Install the front fascia. Refer to Front Bumper Fascia Replacement (Redline) or Front Bumper Fascia Replacement (Standard) .
scientia non olet · About LEMON Manuals