LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1811 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front roof panel applique. Refer to Roof Front Panel Applique Replacement .
    2. Fig 1: View Of Side Windshield Molding
    GM929816Courtesy of GENERAL MOTORS CORP.
  2. Remove the side windshield molding from the windshield using a scraper to cut the adhesive from the windshield surface. This may take several passes to remove all of the adhesive.
  3. Clean the old adhesive from the glass using isopropyl alcohol.
scientia non olet · About LEMON Manuals