LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1804 (Bumpers And Fascias) >> Repair Instructions >> Front Bumper Fascia Energy Absorber Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Energy Absorber Replacement - Front
    GM929504Courtesy of GENERAL MOTORS CORP.
  1. Position the energy absorber to the impact bar.
  2. Install the energy absorber to impact bar push-in retainers.
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (Redline)  or Front Bumper Fascia Replacement (Standard) .
scientia non olet · About LEMON Manuals