LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1770 (Rear Drive Axle) >> Repair Instructions >> Rear Axle Shaft Seal Replacement - Left >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Left Rear Wheel & Tire Assembly
    GM693610Courtesy of GENERAL MOTORS CORP.
  1. Install the new output shaft seal using the J 44809  . See Special Tools .
  2. Install the left rear wheel drive shaft. Refer to Wheel Drive Shaft Replacement - Rear in Wheel Drive Shafts.
  3. Inspect the rear drive module fluid level. Refer to Lubricant Level Inspection - Rear Drive Axle .
  4. Install the left rear wheel and tire assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.