Special Tools

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 3940 Bearing Race Remover
Courtesy of GENERAL MOTORS CORP.	J 22912-01 Bearing Puller
Courtesy of GENERAL MOTORS CORP.	J 35664 Pinion Shaft Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 43964 Engine Stand Fixture Adapter
Courtesy of GENERAL MOTORS CORP.	J 44809 Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44851 Pinion Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44852 Front Clutch Drum Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44853 Rear Clutch Drum Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44854 Side Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 44855 Side Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 44856-01 Gage Arbor
Courtesy of GENERAL MOTORS CORP.	J 44856-02 Front Pilot Washer
Courtesy of GENERAL MOTORS CORP.	J 44856-03 Gage Plate
Courtesy of GENERAL MOTORS CORP.	J 44856-04 Gage Stud
Courtesy of GENERAL MOTORS CORP.	J 44856-05 Master Bearings
Courtesy of GENERAL MOTORS CORP.	J 44856-06 Gage Stud
Courtesy of GENERAL MOTORS CORP.	J 44856-07 Backlash Gage
Courtesy of GENERAL MOTORS CORP.	J 44856-08 Differential Pin Wrench
Courtesy of GENERAL MOTORS CORP.	J 44856-09 Master Bearing Caps
Courtesy of GENERAL MOTORS CORP.	J 44856-10 Alignment Disc
Courtesy of GENERAL MOTORS CORP.	J 44858 Pinion Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 44861 Pinion Inner Bearing Race Installer
Courtesy of GENERAL MOTORS CORP.	J 44864 Pinion Nut Wrench
Courtesy of GENERAL MOTORS CORP.	J 44865 Spline Socket
Courtesy of GENERAL MOTORS CORP.	J 44866 Support Bushing Remover and Installer
Courtesy of GENERAL MOTORS CORP.	J 44868 Housing Spreader
Courtesy of GENERAL MOTORS CORP.	J 44869 Assembly Holding Fixture
Courtesy of GENERAL MOTORS CORP.	J 44873 Pinion Flange Holder and Remover
Courtesy of GENERAL MOTORS CORP.	J 45923 Alignment Pins
Courtesy of GENERAL MOTORS CORP.	J 46607 Alignment Tool
Courtesy of GENERAL MOTORS CORP.	SA9114T Converter Bearing Installer