Wiring Harness Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Solenoid Harness Connectors

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Do not damage the wiring harness connectors.

Disconnect the wiring harness connectors 1-8.

Fig 2: View Of Fluid Temperature Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the fluid temperature sensor bolt (31).
Remove the fluid temperature sensor clamp (49).
Remove the fluid temperature sensor (36) and the O-ring (32) from the control valve body assembly.

Fig 3: View Of Wiring Harness Assembly

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Do not break the wiring harness connectors or the fluid temperature sensor.

Remove the wiring harness (33) from the automatic transmission wiring harness clip.
With a twisting motion remove the complete wiring harness assembly.