LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Automatic Transaxle - AF33-5 (Removal & Installation, Service & Overhaul)) >> Repair Instructions >> Transmission Shift Control Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transaxle Control Bracket
    GM944383Courtesy of GENERAL MOTORS CORP.
  1. Install the transaxle control bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the transaxle control bracket bolts.

    Tighten:  Tighten the transaxle control bracket bolts to 25 N.m (18 lb ft).

  3. Install the control assembly. Refer to Shift Control Replacement  installation procedure in this section.
scientia non olet · About LEMON Manuals