LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Automatic Transaxle - AF33-5 (Removal & Installation, Service & Overhaul)) >> Repair Instructions >> Transmission Oil Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transaxle Oil Cooler Lines
    GM945432Courtesy of GENERAL MOTORS CORP.
  1. Remove the fascia. Refer to Fascia Replacement - Front Bumper removal procedure in Body and Accessories.
  2. Separate the transaxle oil cooler lines from the radiator.
  3. Remove the oil cooler line-to-radiator bracket bolt.
    4. Fig 2: Battery Box Air Duct
    GM948926Courtesy of GENERAL MOTORS CORP.
  4. Remove the battery box inlet air duct.
    5. Fig 3: View Of CRFM Closeout/Splash Panel To Condenser
    GM948958Courtesy of GENERAL MOTORS CORP.
  5. Remove the condenser splash shield.
    6. Fig 4: View Of CRFM Mounting Brackets To The Radiator Support
    GM948980Courtesy of GENERAL MOTORS CORP.
  6. Remove the upper CRFM bracket assemblies.
    7. Fig 5: View Of Transmission Cooler Liners To The Vehicle
    GM949086Courtesy of GENERAL MOTORS CORP.
  7. Unclip the condenser from the radiator.
  8. Unclip the transaxle oil cooler from the radiator and remove.
scientia non olet · About LEMON Manuals