LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Automatic Transaxle - AF33-5 (Removal & Installation, Service & Overhaul)) >> Repair Instructions >> Third Gear Band Servo Piston Assembly Removal

Third Gear Band Servo Piston Assembly Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing 3rd Gear Servo Cover Retaining Ring
    GM749475Courtesy of GENERAL MOTORS CORP.
  1. Rotate the transmission assembly so the rear case cover assembly is facing up.
  2. Remove the third gear servo cover retaining ring (60) from the transmission case assembly (17).
    3. Fig 2: View Of 3rd Gear Band Servo Cover
    GM773168Courtesy of GENERAL MOTORS CORP.
  3. Remove the third gear band servo cover (59) from the transmission case assembly.
  4. Remove the 2 O-ring seals (58) from the third gear band servo cover (59).
    5. Fig 3: View Of 3rd Gear Band Servo Compression Spring & Piston Assembly
    GM749477Courtesy of GENERAL MOTORS CORP.
  5. Remove the third gear band servo piston assembly (57).
  6. Remove the third gear band servo compression spring (56).
scientia non olet · About LEMON Manuals