LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Automatic Transaxle - AF33-5 (Removal & Installation, Service & Overhaul)) >> Repair Instructions >> 1-2 Reverse Carrier Gear Assembly Removal

1-2 Reverse Carrier Gear Assembly Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 1-2 Reverse Carrier Gear Assembly
    GM749470Courtesy of GENERAL MOTORS CORP.
  1. Remove the 1-2 reverse carrier thrust washer (590).
  2. Remove the 1-2 reverse carrier gear assembly (591).
  3. Remove the 1-2 reverse internal gear thrust washer (590).
    4. Fig 2: View Of 1-2 Reverse Internal Gear, Front Thrust Bearing Assembly & Rear Thrust Bearing Assembly
    GM749472Courtesy of GENERAL MOTORS CORP.
  4. Remove the 1-2 reverse internal gear front thrust bearing assembly (593).
  5. Remove the 1-2 reverse internal gear (594).
    6. IMPORTANT: Depending on the production date of the transmission, it may have the 1-2 reverse internal gear shim (596). Early production transmission did not use the shim.
  6. Remove the 1-2 reverse internal gear shim (596), if equipped.
  7. Remove the 1-2 reverse internal gear rear thrust bearing assembly (595), from the 1-2 reverse internal gear (594).
scientia non olet · About LEMON Manuals