LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Automatic Transaxle - AF33-5 (Removal & Installation, Service & Overhaul)) >> Description and Operation >> Drive and Intermediate Range - Third Gear >> Fluid Pressure Directed In Preparation For A Shift To Fourth Gear >> 1-2, 2-3, Reverse Shift Solenoid (SS) Valve Assembly (S3):

1-2, 2-3, Reverse Shift Solenoid (SS) Valve Assembly (S3):

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Drive (19) fluid passes through orifice #24 into the S3 signal (16) fluid circuit in preparation for a shift. The normally closed 1-2, 2-3, reverse SS valve assembly is energized (ON), allowing any fluid pressure in the S3 signal (16) fluid circuit to exhaust through the solenoid.

IMPORTANT: Power flow for Intermediate Range - Third Gear is exactly the same as Drive Range - Third Gear.