Cruise Control Indicator Always On
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Cruise Control Indicator Always On
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Cruise Control Schematics | |||
| 1 | Did you review the Cruise Control Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Cruise Control |
| 2 |
|
Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
| 3 |
|
Go to Step 8 | Go to Step 4 |
| 4 |
|
Go to Step 5 | Go to Step 7 |
| 5 |
|
Go to Step 11 | Go to Step 6 |
| 6 | Inspect for poor connections at the harness connector of the cruise control module. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 9 |
| 7 | Inspect for poor connections at the harness connector of the cruise control switch. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 10 |
| 8 | Repair the short to ground condition in the cruise indicator control circuit between the cruise indicator and the cruise control module. Refer to Wiring Repairs
in Wiring Systems. Did you complete the repair? |
Go to Step 11 | - |
| 9 | Replace the cruise control module. Refer to Cruise Control Module Replacement . Did you complete the replacement? |
Go to Step 11 | - |
| 10 | Replace the cruise control switch. Refer to Cruise Control Switch Replacement Did you complete the replacement? |
Go to Step 11 | - |
| 11 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |