Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Connect the heater inlet hose to the heater core.
Important: Reposition heater core hose clamps in the indicated location.
Use J 38185 in order to reposition the heater core hose inlet clamp.

Fig 1: Connecting Heater Inlet Hose To Heater Core
Courtesy of GENERAL MOTORS CORP.
Connect the heater inlet hose (3) to the inlet pipe.
Use J 38185 in order to reposition the heater hose clamp.
Refill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM .

Fig 2: Connecting Heater Inlet Hose To Inlet Pipe

Courtesy of GENERAL MOTORS CORP.