EVAP Canister Purge Solenoid: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten EVAP canister purge solenoid retaining nuts to specification. See TORQUE SPECIFICATIONS .

To install, reverse removal procedure. Tighten EVAP canister purge solenoid retaining bolt to specification. See TORQUE SPECIFICATIONS .

Fig 1: Locating Throttle Position Sensor, EVAP Canister Purge Solenoid & Throttle Actuator Control Motor (8.1L)

Courtesy of GENERAL MOTORS CORP.