Intake Manifold: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS . Tighten upper intake manifold retaining studs to specification using an alternating sequence.

Fig 1: Removing/Installing Accelerator Control Cable Routing Bracket (4.3L)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing/Installing Accelerator Control Cable Bracket (4.3L)

Courtesy of GENERAL MOTORS CORP.