Shift Lever - Assemble - Off Vehicle
- Install the shift lever seal (2) onto the shift lever assembly (4).
- Install the shift lever assembly (4).
- Install the shift lever screw (3) into the shift lever assembly (4). Tighten the screw to 1.5 N.m (13 lb in).
- Slide the shift lever seal (2) down the shift lever assembly (4).
Courtesy of GENERAL MOTORS CORP.
- Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle
.
- Enable the inflatable restraint steering wheel J module. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM
.