LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Power Seat System) >> Repair Instructions >> Seat Replacement - Bucket >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to SIR CAUTION .
  1. Disable the SIR system. Refer to DISABLING THE SIR SYSTEM .
  2. Disconnect the seat belt electrical connector (3) from the body wiring harness.
  3. Disconnect the power seat connector from the body wiring harness 6-way power seat only.
  4. Disconnect both seat back and seat cushion heated seat element connectors from the harness.
  5. For the passenger seat only, remove the front under-seat storage tray. Refer to Storage Tray Replacement - Right Front Seat .
  6. Remove the front seat nuts (2).
  7. Remove the front seat (1) from the vehicle.