Shift Lever - Assemble - Off Vehicle
WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo and 2002 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shift lever (4) and secure it with the shift lever screw (3). Tighten the screw to 20 N.m (15 ft lbs).
- Slide the shift lever seal (2) down the shift lever (4).
- Install the upper and lower trim cover assembly. Refer to the Steering Column Trim Covers - Assemble - Off Vehicle .
- Enable the inflatable restraint steering wheel module. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .