LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Drum Brake Adjusting Hardware >> Installation

Drum Brake Adjusting Hardware: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the adjuster actuator lever. Install the straight end of the adjuster spring to the brake shoe. Install the hook end of the adjuster spring to the adjuster actuator lever.
  2. Inspect the adjuster for proper engagement with the drum brake system components. See Figure . Ensure that the adjuster engages the brake shoes and, the park brake actuator, and the adjuster actuator properly.
  3. Adjust the drum brakes. See DRUM BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS. Install the brake drum. Install the rear wheel and tire. Tighten to specification. See TORQUE SPECIFICATIONS  . Lower the vehicle.
scientia non olet · About LEMON Manuals